Calculate the energy in kcal used by a 50-kg woman who does 53 deep knee bends in which her center of mass is lowered and raised 0.400 m. (She does…

Calculate the energy in kcal used by a 50-kg woman who does 53 deep knee bends in which her center of mass is lowered and raised 0.400 m. (She does work in both directions.) You may assume her efficiency is 20%.(b) What is the average energy consumption rate in watts if she does this in 3.00 min?

31)The solubility of barium hydroxide in water was measured as a function of temperature. Solubility (g in 100mL of solution) Use the graph produced…

how to solve this?? Explain in step by step please

31)The solubility of barium hydroxide in waterwas measured as a function of temperature.Solubility (g in 100mL of solution)Use the graph produced in that experiment35.0(shown here) to determine the 4Go for the30.0solubility of barium hydroxide at 25.C.25.0MM(Ba(OH)2) = 171.34g/mol20.0a. 22.9 kJ/mol15.015.4 kJ/mol10.0c. 5.72 k]/mol5.0d. -4.00 kJ/mol0.0e. -6.09 kJ/mol0 10 20 30 40 50 60 70 80T (oc)

Name a specific component of a typical synovial joint and discuss its importance in joint function. Explain synovial joint and discuss the function…

  1. Name a specific component of a typical synovial joint and discuss its importance in joint function.
  2. Explain synovial joint and discuss the function and location of that synovial joint.
  3. Discuss a type of movement at a synovial joint and provide at least 2 examples of locations that produce that movement.

A particle has a charge of +1.5 C and moves from point A to point B , a distance of 0.

A particle has a charge of +1.5 μC and moves from pointAto pointB, a distance of 0.22 m. The particle experiences a constant electric force, and its motion is along the line of action of the force. The difference between the particle’s electric potential energy atAandBis EPEA – EPEB = +8.8 x 10-4J.(a)Find the magnitude of the electric force that acts on the particle.(b)Find the magnitude of the electric field that the particle experiences.

Thomas is a diabetic. While at work, he began to tremble, was somewhat disoriented, and showed signs similar to that of a drunk.

Thomas is a diabetic. While at work, he began to tremble, was somewhat disoriented, and showed signs similar to that of a drunk. One of his colleagues gave him some hard candy, which seemed to help him return to normal functions. Why did hard candy have this effect? Was giving hard candy a proper action, considering that Thomas is diabetic?

A skateboarder shoots off a ramp with a velocity of 6.5 m/s, directed at an angle of 56 above the horizontal. The end of the ramp is 1.1 m above the…

A skateboarder shoots off a ramp with a velocity of 6.5 m/s, directed at an angle of 56° above the horizontal. The end of the ramp is 1.1 m above the ground. Let the x axis be parallel to the ground, the +y direction be vertically upward, and take as the origin the point on the ground directly below the top of the ramp. (a) How high above the ground is the highest point that the skateboarder reaches? (b) When the skateboarder reaches the highest point, how far is this point horizontally from the end of the ramp?

According to the textbook, which one of the following conclusions is most true regarding factors that influence brain development?

According to the textbook, which one of the following conclusions is most true regarding factors that influence brain development?

   Genetic factors have the strongest influence on brain development, particularly later in life.

Environmental factors and people’s experiences have the strongest influence on brain development in middle childhood.

   Together, brain development is shaped by genetic and environmental factors throughout the life span.

Environmental factors are particularly influential in abnormal brain development.

Polypropylene (pp) and heat: A wifi laptop is placed on a metal stand that sits on a polypropylene (pp) utility cart (rated 0-200 degrees F). The…

Polypropylene (pp) and heat: A wifi laptop is placed on a metal stand that sits on a polypropylene (pp) utility cart (rated 0-200 degrees F). The cart heats up around the perimeter. What type of heat from the computer is the cart absorbing? RF Radiation ; Heat Radiation ; ELF Radiation; or a mix of frequencies? What is the method of transfer conduction or radiation? What is happening?

An 82.5 g sample of a metal is heated to 98.5 Celsius and is added to 125.0 g sample of water at 21.2 Celsius. After thermal equilibrium is…

An 82.5 g sample of a metal is heated to 98.5 Celsius and is added to 125.0 g sample of water at 21.2 Celsius. After thermal equilibrium is established, the final temperature of the mixture is 27.5 Celsius. Assuming no heat is lost to the surroundings or the calorimeter, what is the specific heat of the metal?