1- i will upload the report template what I need you please to follow it. For the writing part, I… 1 answer below »

1- i will upload the report template what I need you please to follow it. For the writing part, I would like you to start from " ABSTRACT ' then move to 'ACKNOWLEDGEMENTS' and then so on. Also, in the introduction part, if you could talk about this locomotive in general. If you could to add ( PPERT chart and Critical path analysis ) please I need this chart.
2- i used a program called NX 9.0 – this link will help you to know what is the project ,and you can use the tool "explode" on the 3D view screen to see the parts inside, because i made the same jet engine with the same details. "https://grabcad.com/library/steam-locomotive/files/Mecanismo%20Tren.SAT# “.
3- for the methodology you should be aware of some NX 9 tools to mention it in a proper way, for building the locomotive, i used many tools such as: revolve, mirroring, extrude, sketch, shell, chamfer, edge blend, pattern, datum plane to draw on a curve, etc.. Also, I will upload some pictures of the parts that did and I would like you if you talk about them in very short details.
4- this project is a group effort, each member did parts of the Locomotive, after that the group made the assembly to reach the final product, designing and assembling was done using the program NX 9.
5- Also I need you to write a bill of materials.
6- make a Gantt chart.
https://grabcad.com/library/steam-locomotive/files/Mecanismo%20Tren.SAT#